chandelier crystal art wall lamp is an could be fixed in the hotel, washroom and hall as brass art wall lamp and deco art wall lamp. With the long crystal design make it feel more fashion as a wall sconces.
Specification of the Product
others are available
Iron and alloy are available
other color is available
Other special is available
Delivery doesn’t include light bulbs.
According to your actual demand
standard export carton
30% advance deposit,70% balance before loading
30 days after advance deposit
Exact goods will be done according to your drawing, sample etc
The design is modern and fashion.
The lamp is made by brass and crystal.
the chandelier is exquisite.
made by K9 crystal.
Each process is hand made, makes it more unique and be satis+fied with our client.
Each process could demonstrate our rich experience in this field.
The wall light should be installed as follows
(1) First, select the appropriate wooden board or wooden table according to the shape of the luminaire, place the luminaire on it, and leave the remaining amount around the symmetry. Then use the electric drill to open the outlet hole and the mounting hole on the wooden board. The mounting hole is also opened on the bottom plate of the lamp, and the lamp head wire of the lamp is taken out from the outlet hole of the wooden table (board), and the connector in the lamp box on the wall is tightly wrapped, and then the connector is inserted into the box.
(2) The insulating table is aligned with the lamp box, and the wall surface is attached to the wall. The insulating table is directly fixed to the ear of the box with a machine screw. If the diameter of the round table exceeds 75mm, it should be fixed by more than 2 expansion tubes. Adjust the insulation table to a straight line, fix the lamp to the insulation table with screws, and finally equip the lamp, lamp umbrella or lamp cover. The lampshade and the bulb must not touch each other. If the distance between the lampholder and the bulb is less than 5mm, heat insulation measures should be added.
(3) The wall lamp installed outside should be waterproof and drained. The rubber pad should be added between the insulation table and the wall surface. It is possible to drain the water hole where water is accumulated. The terminal box behind the installation of the wall lamp should have no opening. If there is no terminal box, the junction box should be fireproofed.